ACE BACKSTAGE CO., INC. large-sized Stage Pocket, the Full Stage Pocket, is a standard general use vertical slant panel flush stage pocket. The Full Stage Pocket is made of heavy duty steel and may be used to conceal audio, communications, control, data, electric AC power, switches, video, and voice connections etc. below the floor surface for easy access and to prevent connector damage. The Full Stage Pocket has a larger capacity inter-changeable panel system which permits easy custom connector/panel configurations.

The Full Stage Pocket has the panel capacity for either:
• (2) #PNL-100 Series CONNECTRIX Panels or
• (2) #PE Series Single Gang Electric Panels or
• (1) #PNL-100 Series CONNECTRIX Panel and (1) #PE

The Full Stage Pocket has the connector capacity for either:
• (12) CONNECTRIX Connectors or
• (6) CONNECTRIX, Neutrik®, or Switchcraft® Connectors and (1) #PE Single Gang Electric Panel

#PNL-100 series panels, #PE Electric panels and connectors are sold seperately- you will need to order these for a complete stage pocket.

All ACE Full Stage Pockets are welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange and a 16 ga. (.062") thick Pocket Body. The Full Stage Pocket resists bending under even the most severe stage loads.

Removable spring loaded hinge pins permits easy exchange of lids for carpet lids, locking lids, standard lids, and other custom application lids. A generous cable way slot of 3/8" x 8" permits easy cable exit from the stage pocket, even for large gauge cables. A cable way slot closure channel closes the slot when not in use. The Full Stage Pocket has an easy installation into 8.5" x 8.5" cutout in the stage floor. Open easy access from top or back of the Full Stage Pocket to connector panels makes for easy installation.

A scratch/wear resistant finish, oven cured black powder coat is electrostaticly applied inside and outside the entire Stage Pocket. Other finishes are available by special order. The Full Stage Pocket's solid rubber Lid Stops cradle the lid to prevent lid rattle.

DETAILED SPECS AND DIMENSIONS

 

Black aluminum stage pocket panel holds up to Five Connectrix or Neutrik connectors (sold separately). Unused openings can be covered with C15112 blanks then removed to add more connectors later.

Cover unused openings in your PNL-100 series stage pocket panel with these blanks, then remove them later when you want to add more connectors.

Standard PE (single gang box) provides for one standard duplex outlet. This item is UL listed in conjunction with UL listed ACE pockets. When properly installed with isolating AC wiring conduit, combining low voltage connections in the same pocket should not be an issue. Consult your local building codes for any specific application.

Each assembly is complete with a single gang box, black powder coat steel mounting panel, black powder coat steel narrow duplex cover panel and mounting screws. The PE will install in any pocket that accepts a standard type PNL-100 panel. Receptacle is not included.

The C-15102 is a standard Neutrik female locking XLR connector that mounts into any PNL-100-series stage pocket panel. Durable metal construction with solder-cup terminals.

ACE BACKSTAGE CO., INC. large-sized Stage Pocket, the Half Stage Pocket, is a standard general use vertical slant panel flush stage pocket. The Half Stage Pocket is made of heavy duty steel and may be used to conceal audio, communications, control, data, electric AC power, switches, video, and voice connections etc. below the floor surface for easy access and to prevent connector damage. The Full Stage Pocket has a larger capacity inter-changeable panel system which permits easy custom connector/panel configurations.

The Half Stage Pocket has the panel capacity for either:
• (1) #PNL-100 Series CONNECTRIX Panels or
• (1) #PE Series Single Gang Electric Panels or

The Full Stage Pocket has the connector capacity for:
• 6) CONNECTRIX Connectors or

#PNL-100 series panels, #PE Electric panels and connectors are sold seperately- you will need to order these for a complete stage pocket.

All ACE Half Stage Pockets are welded steel construction, with a 1/8" (nominally 11 ga. (.120")) thick CRS steel Lid and Mounting Flange and a 16 ga. (.062") thick Pocket Body. The Full Stage Pocket resists bending under even the most severe stage loads.

Removable spring loaded hinge pins permits easy exchange of lids for carpet lids, locking lids, standard lids, and other custom application lids. A generous cable way slot of 3/8" x 4" permits easy cable exit from the stage pocket, even for large gauge cables. A cable way slot closure channel closes the slot when not in use. The Full Stage Pocket has an easy installation into 4.75" x 8.5" cutout in the stage floor. Open easy access from top or back of the Half Stage Pocket to connector panels makes for easy installation.

A scratch/wear resistant finish, oven cured black powder coat is electrostaticly applied inside and outside the entire Stage Pocket. Other finishes are available by special order. The Half Stage Pocket's solid rubber Lid Stops cradle the lid to prevent lid rattle.

DETAILED SPECS AND DIMENSIONS

The C-15100 is a standard Neutrik female XLR connector that mounts into any PNL-100-series stage pocket panel. Nylon construction with solder-cup terminals.

The C-15101 is a standard Neutrik male XLR connector that mounts into any PNL-100-series stage pocket panel. Nylon construction with solder-cup terminals.

The C-15103 is a standard Neutrik male XLR connector that mounts into any PNL-100-series stage pocket panel. Durable metal construction with solder-cup terminals.

Durable nylon 1/4" female jack features a lock mechanism that keeps your cables from pulling out. This is a TRS jack, but you can also wire it TS. Solder cup terminals. Mounts in any PNL-100 series panel.