Our most popular speaker stand! The SS7761B is a lightweight aluminum tripod stand that will support most any portable PA speaker. Black powder-coated finish is unobtrusive and durable.

Reversible 1-3/8" - 1-1/2" upper shaft and locking safety pin
Tripod folding legs
Non-slip rubber feet
Height adj: 44-80"
120 lbs capacity
Replacement parts are available

Durable padded nylon bag measures roughly 50" x 10" x 5" and holds two SS7761B or similar speaker stands. Includes shoulder strap.

Our best selling stand! This Euro Boom boasts a hybrid sheet metal and composite leg housing, making it virtually unbreakable. With a removable boom arm and its ability to fold flat, this stand is a must for every member of the band. Features a zinc mid-point clutch and black finish.

SPECIFICATIONS

• Boom Length 30" (762mm)
• Height 36-64" (914 x 1626mm)
• Base 23" (584mm) (Spread)
• Weight 5.15 lbs (2.34kg)

6" Split screen removes unwanted "P" and "B" consonants by providing open space between 2 screens. C-clamp fits most standard mic shafts. 11 ½" Gooseneck extension.
 

• 6" Plastic hoop
• Dual micro-weave black nylon diffusers
• C-clamp fits most standard mic shafts
• 11.5" Gooseneck

What do you do if you have a speaker cabinet that does not have a built-in speaker mount socket, but you'd like to use it on top of a tripod speaker stand? Simply install a BMB-200K to the bottom of the speaker cabinet, and you're set! The BMB-200K is an external mounting bracket for speaker cabinets that do not have built-in speaker mount sockets. It mounts on a flat surface with included installation hardware.

BMB-200K Features:
External bracket securely mounts any speaker cabinet with a flat bottom on a (1-1/2") (38 mm) speaker stand tube.
Measures 4" x 6" (102 mm x 152 mm).
All hardware included for installation.
Glass-reinforced polycarbonate fitting holds 100 lbs. (45.5 kg).

The Original Series speaker stands from Ultimate Support are extraordinarily strong yet lightweight due to its over-sized heavy wall aluminum tubing. They're everything you'd expect from an Ultimate Support speaker stand - they're strong, sturdy, lightweight, and 100% field serviceable. You can choose between a black or silver finish with the TS-80B and TS-80S or the TS-88B, which has a black finish and is about two and a half feet taller than the TS-80B and TS-80S. The Original Series tripod speaker stands from Ultimate Support are the industry standards that you've seen on stages for decades.

TS-80B Product Breakdown:
Patented Tripod Design
Over-sized Heavy Wall Aluminum Tubing
100% Field Serviceable Parts
Patented Die-cast Metal Collar on TLF

Patented Tripod Design
The TS-80B's offset tripod base design provides more support than typical "off-the-shelf" speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super strong die-cast metal collar that prevents over-tightening and breakage issues associated with all plastic designs.

Over-sized Heavy Wall Aluminum Tubing
The entire stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The TS-80B will not rust or corrode (thanks to its architectural anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight.

100% Field Serviceable Parts
From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-80B is serviceable by parts as needed over its very long lifespan. In the unlikely event that something does break on the TS-80B, simply replace with an affordable part instead of throwing the entire stand away and buying a whole new one!

Patented Die-cast Metal Collar on TLF
The strongest leg fitting made, the collar on the TS-80B's tripod leg fitting (TLF) prevents over-tightening and breakage issues associated with all plastic designs. Plus, our die-cast fitting is 30x stronger than ABS or Nylon plastic used by the competition.

Color: Black
Height: 3'8" - 6'7" (1118 mm - 2007 mm)
Weight: 7.3 lbs. (3.3 kg)
Base Diameter: 47" (1194 mm)
Telescoping Tube Diameter: 1.5" (38 mm)
Adapter Diameter: 1.375" (35 mm)
Load Capacity: 150 lbs. (68.2 kg)
Folded: 43.5" x 5.5" (1105 mm x 140 mm)

The TeleLock® Series speaker stands from Ultimate Support are extraordinarily strong yet lightweight due to its over-sized heavy wall aluminum tubing. They're everything you'd expect from an Ultimate Support speaker stand - they're strong, sturdy, lightweight, 100% field serviceable, and easy to set up and take down. However, the TeleLock collar gives the user the ability to safely raise or lower the stand WHILE a speaker is on it thanks to the Auto-lock technology that securely grips the telescoping tube in place as you set its height.

TS-90B Product Breakdown:
Patented TeleLock Collar
Patented Tripod Design
Over-sized Heavy Wall Aluminum Tubing
100% Field Serviceable Parts

Patented TeleLock Collar
The TS-90 is one of the easiest speaker stands to use thanks to its patented TeleLock collar. Set the TeleLock collar to either the "Raise" or "Lower" setting and the Auto-lock technology provides just the right amount of resistance to allow you to raise or lower the speaker while locking the tube in place as you go. It's like having tour support built into your speaker stand!

Patented Tripod Design
The TS-90's offset tripod base design provides more support than typical "off-the-shelf" speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super strong die-cast metal collar that prevents over-tightening and breakage issues associated with all plastic designs.

Over-sized Heavy Wall Aluminum Tubing
The entire stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The TS-90 will not rust or corrode (thanks to its architectural anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight.

100% Field Serviceable Parts
From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-90 is serviceable by parts as needed over its very long lifespan. In the unlikely event that something does break on the TS-90, simply replace with an affordable part instead of throwing the entire stand away and buying a whole new one!

Height: 3'8" - 6'7" (1118 mm - 2007 mm)
Weight: 8 lbs. (3.3 kg)
Base Diameter: 47" (1194 mm)
Telescoping Tube Diameter: 1.5" (38 mm)
Adapter Diameter: 1.375" (35 mm)
Load Capacity: 150 lbs. (68.2 kg)
Folded: 43.5" x 5.5" (1105 mm x 140 mm)

The TeleLock® Series speaker stands from Ultimate Support are extraordinarily strong yet lightweight due to its over-sized heavy wall aluminum tubing. They're everything you'd expect from an Ultimate Support speaker stand - they're strong, sturdy, lightweight, 100% field serviceable, and easy to set up and take down. However, the TeleLock collar gives the user the ability to safely raise or lower the stand WHILE a speaker is on it thanks to the Auto-lock technology that securely grips the telescoping tube in place as you set its height.

TS-99B Product Breakdown:
Patented TeleLock Collar
Extra Height
Patented Tripod Design
Over-sized Heavy Wall Aluminum Tubing
100% Field Serviceable Parts

Patented TeleLock Collar
The TS-99B is one of the easiest speaker stands to use thanks to its patented TeleLock collar. Set the TeleLock collar to either the "Raise" or "Lower" setting and the Auto-lock technology provides just the right amount of resistance to allow you to raise or lower the speaker while locking the tube in place as you go. It's like having tour support built into your speaker stand!

Extra Height
The TS-90B is plenty tall enough for most normal situations. However, when you need to get your speaker, lighting tree, light truss, or whatever, up a little higher, the TS-99B is the perfect stand for you! The TS-99B adds about 26 inches of additional height and has a maximum height of 9' 2"!

Patented Tripod Design
The TS-99B's offset tripod base design provides more support than typical "off-the-shelf" speaker stands. The design makes for very tight internal fittings, doing away with unnecessary sloppy leg problems, and includes a super strong die-cast metal collar that prevents over-tightening and breakage issues associated with all plastic designs.

Over-sized Heavy Wall Aluminum Tubing
The entire stand (legs, mast, and telescoping tube) uses oversized, heavy-walled aluminum tubing for durability, functionality, and weight savings. The TS-99B will not rust or corrode (thanks to its architectural anodized finish), is very smooth to operate, and is extraordinarily strong yet lightweight.

100% Field Serviceable Parts
From the foot caps on the bottom of the tripod legs all the way up to the speaker adapter at the top of the stand, the TS-99 is serviceable by parts as needed over its very long lifespan. In the unlikely event that something does break on the TS-99, simply replace with an affordable part instead of throwing the entire stand away and buying a whole new one!

Height: 5'2"- 9'2" (1575 mm - 2794 mm)
Weight: 9.8 lbs. (4.5 kg)
Base Diameter: 62" (1575 mm)
Telescoping Tube Diameter: 1.5 (38 mm)
Adapter Diameter: 1.375" (35 mm)
Load Capacity: 150 lbs. (68.2 kg)
Folded: 57.5" x 5.5" (1461 mm x 140 mm)

If you're looking for an affordable, secure way to add a lighting tree to your gig, start right here with the LTP-48B. It's a 48" T-style lighting crossbar that easily and securely fits on the top of any current Ultimate Support TS tripod speaker stand (extra-tall Ultimate Support TS tripod speaker stands are recommended), and/or an LTV-24B Vertical Extension. Simply place it on top of any one of these and you have a professional lighting tree - just add your lights and you're ready!

The LTB-48B features four pre-drilled holes for convenient mounting of your lighting equipment - we've even included mounting hardware to get you started. It's constructed with thick-walled aluminum so while it's amazingly light, it's rated for use with C-clamps (not included). The LTB-48B also includes two UNF-150 mounting brackets for mounting lighting equipment, such as dimmer packs, to the lighting tree.

LTB-48B Features:
Black scratch resistant anodized finish
Strong, yet lightweight aluminum tubing
Includes four pre-drilled holes and mounting hardware for each
Includes two UNF-150 mounting brackets
Length: 4'
Weight: 4 lbs. (1.8 kg)
Weight Capacity: 60 lbs (when evenly distributed)
Finish: Black anodized

This revolutionary threadless stand brings an end to the seemingly eternal chore of screwing your microphone stand into your base. In one swift motion, just push down and turn the shaft one-quarter clockwise to lock, or push down and turn one-quarter counter-clockwise to remove. The uniquely shaped 9lb base on this patented item means more room for foot placement. The low profile design makes for an especially stable stand. The pistol grip at the top of the shaft also works in quarter-turns, making for fast height adjustments.

Pistol grip clutch
Shaft turns 1/4 clockwise to lock or 1/4 counterclockwise to remove
Height adj: 33-61"
Black finish